Edelbrock Victor Race Heads

These are the same heads many racers and serious street machiners use to make over 750 hp N/A or 1500 plus with blower/turbo/nos.raised intake ports and 15 degree valve angles help to produce massive flow for any stroker engines requirements.

 tricked out assembled heads start at 3495.00

Unported “out of the box” Victor heads flow 324 cfm intake and 237 cfm exhaust @ .700 lift- Intake port volume of 240 cc and uses 2.125″/1.625″ valves
Fox Lake Stage 1 ported Victors flow 366 cfm intake and 281 cfm exhaust @ .700″- Intake port volume of 281 cc and uses 2.125″/1.625″ valves- Stage 1 porting labor is $1100
Fox Lake Stage 2 ported Victors flow an unreal 381 cfm intake and 281 cfm exhaust at .800″ !!!!! – Intake port volume of 301 cc and uses 2.200″/1.625″ valves- Stage 2 porting labor is $1400
Chamber size can be made to your specs anywhere from 38 cc to 62 cc.

Ported bare castings are available also:

  • Stage 1 ported bare castings are $2495.00
  • Stage 2 ported bare castings are $2695.00 ported bare castings are $2695.00

364 cubes built by Steve Lapointe,Powerglide trans built by Frank Lupo and converter, 9inch rear, Riechard racing upper box on trickflow lower, f1r procharger! makes 24psi boost, andrson ford Pms to manage tuning by Mike Dez!! Ladder bars and cage done by Rhodes Custom Auto! Fox Lake CNC Victor Race [281cc] heads!!! 29.5 10.5 m/t tires
FIRST AND ONLY XTREME STREET CAR IN THE 7’S NATIONAL RECORD HOLDER 7.98@174.24 TOP SPEED 175.12.