Edelbrock Victor Jr Heads

Edelbrock Victor Jr. Aluminum (Stage 1,2,3)

STAGE 1: Supercharger Porting Package :

This Package is best suited for the 331-408 cubic inch range with a port matched intake manifold, upgraded fuel system and free flowing exhaust system. A mild cam or 1.72 ratio rocker arms will add more horsepower. With a 210 cc port volume, these heads will support 350-450 hp naturally aspirated or up to 700 hp with forced induction.

 

Stage 1 features Ferrea 6000 series stainless valves, dual springs for up to .600″ lift, 10 degree steel locks and retainers, 7/16 screw in studs and guideplates. Labor included is bowl ported intake and exhaust ports, Fox Lake’s own 3 angle radiused valve job, clean up cut on deck surface to insure proper head gasket sealing, and assembly. Our cylinder heads offer a superior value over “out of the box” Edelbrock cylinder heads.

 

Stage 1 Specifications :

Intake Port Volume = 210cc
Combustion Chamber Volume = 60cc or 70cc as cast
Valve Sizes = 2.055 Int, 1.600 Exh
Max Flow Int. – 280cfm @ .600″
Max Flow Exh. = 220cfm @ .600″

  • Stage 1 CNC FAST Porting Only
    Send us your Castings & we Port them $280.00 Pair
  • Stage 1 CNC FAST Bare Castings
    Castings, Porting, Valve Job – No Parts $1,699.00 Pair
  • Stage 1 CNC FAST Assembled*
    Fully Ported & Assembled – Ready to Bolt On $2,195.00 Pair

STAGE 2: Competition CNC Porting :

Stage 2 Competition Porting is designed for 331-418 cubic inch engines in the 3000-7000 RPM range depending on the application, Street or Strip. EFI Cars should have our Stage 2 Trick Flow, Holley, or Edelbrock Intake for a good package combination, CARBURETOR Cars should use a port matched Edelbrock Victor Junior Intake for best results.
Stage 2 features Ferrea 6000 series stainless valves, dual springs for up to .600″ lift, 10 degree steel locks and retainers, 7/16 screw in studs and guideplates. Labor included is bowl ported intake and exhaust ports, Fox Lake’s own 3 angle radiused valve job, clean up cut on deck surface to insure proper head gasket sealing, and assembly. Our cylinder heads offer a superior value over “out of the box” Edelbrock cylinder heads. Please add $260 for Ferrea 1000 series racing valves, $1,211 for titanium valves, $75 – $260 for hyd. or mech. roller racing springs, $190 for titanium retainers, $150 for Lock Wire receiver grooves, $75 for flat milling to 55cc, or $175 for angle milling to 52 cc.

Stage 2 Specifications :

Intake Port Volume = 215cc
Combustion Chamber Volume = 65cc
Valve Sizes = 2.055 Int, 1.600 Exh
Max Flow Int. – 308cfm @ .700″
Max Flow Exh. = 230cfm @ .700″

  • Stage 2 CNC FAST Porting Only
    Send us your Castings & we Port them $699.00 Pair
  • Stage 2 CNC FAST Bare Castings
    Castings, Porting, Valve Job – No Parts $1,599.00 Pair
  • Stage 2 CNC FAST Assembled*
    Fully Ported & Assembled – Ready to Bolt On $2,250.00 Pair

STAGE 3: Super Competition CNC Porting :

Super Competition Porting is well suited for 347- 427 cubic inches or larger engines. With its BIG 230cc Intake port volume, Stage 3 is the perfect choice for stroker motors, especially on Nitrous or with forced induction. Fully Ported intake manifolds are a MUST for maximum horsepower. These FOXLAKE Edelbrock heads and manifold combinations are capable of 650 plus hp naturally aspirated or over 1200 hp with supercharger! Please add $260.00 for 1000 series racing values, $1,211.00 for titanium valves, $75 – $260 for hyd. or mech. roller racing springs, $190.00 for titanium retainers, $100.00 for flat milling to 55cc.

Stage 3 Specifications :

Intake Port Volume = 230cc
Combustion Chamber Volume = 65cc or 75cc
Valve Sizes = 2.055 or 2.08 Int, 1.600 or 1.625 Exh
Max Flow Int. – 332cfm @ .700″
Max Flow Exh. = 255cfm @ .700″

  • Stage 3 CNC FAST Porting Only
    Send us your Castings & we Port them $999.00 Pair
  • Stage 3 CNC FAST Bare Castings
    Castings, Porting, Valve Job – No Parts $2,099.00 Pair
  • Stage 3 CNC FAST Assembled*
    Fully Ported & Assembled – Ready to Bolt On $2,795.00 Pair

* Head Assemblies Include :

• FERREA Stainless Steel Valves
• 10 Degree Chrome Moly Retainers
• Chrome Silicon Valve Springs
• 10 Degree Machined Superlocks
• PC TEFLON Valve Seals
• ARP 3/8″ or 7/16″ Rocker Studs
• 5/16″ Pushrod Guideplates
• Shims for Proper Spring Pressure

* Titanium Valves, Titanium Retainers, Iskyloy & H-11 Springs Optional (Call for Pricing)